One-component dispersion coating for floor surfaces resistant to abrasion - indoors and outdoors. Approved for tanks for oil in the interior.
One-component acrylic finishing floor coating, reinforced with carbon fiber based on methacrylate, intended for floors and tanks for collecting and keeping oil, indoors and outdoors.
Carbon fiber reinforced 2-component epoxy resin coating, with a recognizable end of usability for processing, for the floor surfaces in the garage, storage and basements.
Dilutable, transparent dispersion topcoat, for smooth or slip-resistant floor coating on dispersion basis sprinkled with chips, for interior work.
Transparent 2K primer from epoxy resins without benzyl alcohol for mineral floors endangered by moisture on the balconies and verandas. Solvent free.
The pigmented elastic coating for balconies, terraces and pergolas on the basis of the two-part epoxy fluid resin and polyurethane. It contains little solvent.
Very elastic 1K PU coating that hardens and on the wet air, for concrete floors, cement screeds and hard asphalt on the balconies and verandas and for renovation of old coatings that firmly bind. Contains solvents.
Transparent high elastic one-component polyurethane coating that hardens on the humidity, for the the outer coating. Contains solvents.
Two-part epoxy liquid resin for priming mineral floor surfaces. Formula for reduced radiation, no harmful substances, especially suitable for all "sensitive" areas such as. The living quarters, hospitals, daycare facilities, schools, etc.
The pigmented coating 2K liquid epoxy resin for floor surfaces in almost all areas. Formula for reduced radiation, no harmful substances, especially suitable for all "sensitive" areas such as. The living quarters, hospitals, daycare facilities, schools, etc.
Pigmented water component polyurethane resin for silk matt topcoat on hard and tough PU and EP surfaces in interior areas.
Dilutable transparent 2-component liquid epoxy resin for priming and impregnation of mineral floor surfaces.
Transparent 2K primer from epoxy resin for mineral floors. Solvent free.
2K coating of epoxy resin for mineral floors and screeds of hard asphalt in warehouses and manufacturing facilities.
Structured slip resistant 2K epoxy resin for mineral floors that are medium encumbered by mechanical stress. Solvent free.
2K epoxy resin, of a large encumber for mineral floors. Solvent free.
2K coating of epoxy resin, extremely resistant to abrasion, anti-slip, for mineral floors. It contains little solvent.
2K coating of epoxy resin, with high resistance to chemical and mechanical encumber for mineral floors, screeds of hard asphalt and metal surfaces. It contains little solvent.
Transparent 2-component liquid epoxy resin for watering of hard internal EP floor coatings sprinkled with chips and as a topcoat to seal system Disboxid ArteFloor System and multicolor system for representative interior spaces.
Pigmented drain-away, self-dispersed top coat of 2K liquid epoxy resin for floors exposed to very high mechanical workloads.
Pigmented two-component coating of epoxy resin, water-based, for floor surfaces in industry and trade. It is intended also for mineral floor surfaces exposed to small to medium mechanical load.
Conductive pigmented 2K epoxy primer in Disboxid, Disbothan and Disbopox Antistatic systems.
Two-component pigmented epoxy leveling compound, which quickly hardens, for layer thicknesses of 0.5 to 30 mm.
The diluent for all Disboxid primers, sealant, coating and, with the exception of Disboxid 430 EP-Rollschicht Diboxid 468 and EP- Strukturschicht.
Diluent for all Disbothan coatings and sealing in this sales program and for Capalac Disbocolor 492/493.
The crystal quartz sand dried on fire. The grain size of .1 to 0.4 mm. For addition into primers and other coatings and for making anti-skid coating and drain away mortar.
The crystal quartz sand dried on fire. The grain size of .1 to 0.4 mm. For addition into primers and other coatings and for making anti-skid coating.
The crystal quartz sand dried on fire sieved to the size of 0.25 to 2 mm for production of layers of mortar of epoxy resin in combination with Disboxid 433 EP-Grund BF and Disboxid 462 EP-Siegel.
A special blend of solid glass microballs. Supplement for Disbon 405 Klarsiegel and PU-Aquasiegel 458.
Disboxid 948 Color-Chips
Prepared agent for protection against corrosion and for repairs of concrete.
Plastic modified cementitious binder for protection against corrosion and better capture for basis for concrete restoration.
Mortar for concrete. For the layer thickness of 5 to 40 mm, largest grain size: 2 mm.
Multifunction rapid setting mortar for concrete with active corrosion protection for reprofiling concrete in a single pass. For a layer thickness of 5 to 40 mm, largest grain size: 2 mm.
Plastic modified cementitious binder mass for filling and flattening of this partial filling and leveling concrete. For a layer thickness of 1 to 5 mm, the largest grain size: 0.4 mm.
Plastic modified cementitious binder mass for filling and flattening and partial filling of pores and voids in the concrete. For a layer thickness up to 3 mm, the largest grain size: 0.2 mm.
Plasto elastic smearing dispersive mass for filling, sealing and primer in one. To fill the pores and voids and mass to level the concrete - and with the old coatings.
Protective coating for bridging cracks and repairing concrete of high power coverage and for concrete with existing coating.